Squat Max Calculator (Squat 1RM Calculator)

Quick answer: enter the weight you squatted and your reps to estimate your max squat. Example: 100 kg × 5 reps ≈ 115 kg squat 1RM, and 225 lb × 5 ≈ 260 lb. Only count reps that hit depth, which means hip crease below the top of the knee.
More options

Estimated one rep max
–kg
–Training max (90%)
–× bodyweight
–Est. 5-rep max
% of 1RMLoadApprox. reps to failureTraining use
RepsPredicted max load% of 1RM

The weight you should be able to lift for each number of reps to failure, based on your estimated 1RM and the selected formula.

Loads for a given number of reps at each RPE (Rate of Perceived Exertion). RPE 10 = no reps left, RPE 8 = 2 reps left. Based on the widely used RPE/RIR percentage chart.

SetLoadRepsRest after

A conservative 1RM test built from your estimate. Stop at any attempt that slows down badly or loses technique – the last clean single is your 1RM. Always use a spotter or safety bars.

Each formula was fitted to a different group of lifters, so they disagree, especially above 10 reps. The spread shows how uncertain any single estimate is.

This squat max calculator estimates your one rep max for the back squat or front squat from any set of 1–20 reps. It’s pre-set for the squat, adjusts for sets you stopped short of failure, and turns the result into squat percentages, warm-up and attempt loads, and exactly which plates to put on the bar. It uses the same seven-formula method as our main 1RM calculator, so your numbers line up across every lift.

How to calculate your max squat

  1. Warm up properly, then squat a weight you can move for 3–6 reps with good depth and control.
  2. Enter the weight and the number of full-depth reps into the calculator. Choose back or front squat.
  3. Set the RPE honestly. If you had two good reps left, pick RPE 8.
  4. Use the % of 1RM tab for your working sets, and the Warm-up & 1RM test tab if you plan to test a true max.

Squat 1RM from reps: quick reference

If you squatted 100 kg for the reps shown (to failure), this is your estimated squat max. For any other weight, multiply by the same factor. For example, 140 kg × 5 → 140 × 1.154 ≈ 161.6 kg.

Reps at 100 kgEstimated squat 1RMMultiplier
1100 kg× 1.000
2106.0 kg× 1.060
3109.2 kg× 1.092
4112.4 kg× 1.124
5115.4 kg× 1.154
6118.5 kg× 1.185
7121.6 kg× 1.216
8124.7 kg× 1.247
10130.9 kg× 1.309
12137.4 kg× 1.374
Seven-formula average. Reps above 10 are less reliable for the squat.

Need loads for every percentage and every 1RM from 60 to 250 kg? Print our full 1RM percentage chart and keep it in your gym bag.

How accurate is a squat max calculator?

Pretty accurate, if your set is honest. In a study comparing seven prediction equations with tested maxes, LeSuer et al. (1997) found the Mayhew and Wathen equations predicted squat 1RM most closely, while others were further off. Averaging the formulas, as this calculator does, keeps you near the middle of the pack. Three things push squat estimates off course:

  • Depth creep. Reps get shallower as fatigue builds. Shallow reps are easier, so they inflate the estimate. Film your set side-on if you’re unsure.
  • Cardio limits on high-rep sets. Sets of 10+ squats are often ended by breathing and leg burn rather than strength, which makes the estimate less reliable. Sets of 3–6 are best.
  • Equipment. Belts and knee sleeves typically add a few percent to a max. Note what you wore and estimate with the same kit.

Back squat vs front squat max

The front squat puts the bar on the front of the shoulders, so your upper back and torso position limit the load more than your legs do. Most lifters front squat roughly 80–90% of their back squat. If your front squat is well below 80%, upper-back strength or mobility (wrists, thoracic spine, ankles) is usually the limiter.

Back squat 1RMExpected front squat (80–90%)
100 kg80–90 kg
140 kg112.5–125 kg
180 kg145–162.5 kg
225 lb180–205 lb
315 lb250–285 lb

Choose Front squat in the exercise menu to estimate it directly. Front squat sets are best kept to 1–5 reps, because the upper back gives out before the legs on longer sets.

How to use your squat max in training

Once you know your squat 1RM, plan your training in percentages. A simple, effective weekly squat template for intermediate lifters:

DaySets × reps% of 1RMExample (1RM 140 kg)
Heavy4 × 385%120 kg
Volume4 × 870%97.5 kg
Light / technique3 × 5 paused60%85 kg

Add 2.5 kg a week while every set stays at or below RPE 8–9. If you autoregulate by feel, the RPE chart tab (and our RPE calculator) shows you squat loads for any reps-and-RPE combination.

Is my squat good? Squat-to-bodyweight ratios

Squat strength is best judged relative to bodyweight. Common coaching milestones are a bodyweight squat (1×), then 1.5× and 2× bodyweight. These are rules of thumb, not official standards, and they depend on age, sex and training history. Add your bodyweight under More options to see your ratio, or get a DOTS score across all three powerlifts with our strength calculator.

Balance matters too. Most lifters squat about 80–90% of their deadlift and bench about 60–75% of their squat. A squat well below that range compared with your deadlift max often points to quad or upper-back weakness.

Testing a true squat max safely

  • Squat inside a power rack with safety bars set just below your bottom position, or with two side spotters.
  • Practise bailing (dumping the bar backwards onto the safeties) with a light weight first.
  • Follow the warm-up in the calculator: 5–6 progressively heavier sets, then 2–3 single attempts with 3–5 minutes’ rest.
  • Stop when a rep slows dramatically or your form breaks. That’s your max for the day.

Our full 1RM testing protocol covers attempt selection, rest times and what to do if you miss.

Squat max FAQs

If I can squat 225 lb for 10 reps, what is my max?

About 295 lb (roughly 134 kg). The seven formulas range from about 281 to 303 lb. Ten-rep sets are less precise, so a heavier set of 3–5 will narrow it down.

If I squat 100 kg for 5 reps, what is my 1RM?

About 115 kg. The formulas range from 112.5 to 119 kg. If the set was at RPE 8 (two reps left), your estimate rises to about 121.5 kg.

Does a belt change my squat max?

Usually yes. Most lifters squat a little more with a belt because it helps them brace. Estimate and train with the same equipment you’ll use for the number you care about.

How often should I test my squat max?

Estimate it from a top set every 4–6 weeks. A true 1RM test every 8–16 weeks is plenty, even for powerlifters.

Reference: LeSuer DA et al. (1997), J Strength Cond Res 11(4):211–213. Estimates are for training purposes only and aren’t medical advice.